4
While choosing the installation-spot, please make sure that the fixture isn’t exposed to extreme
heat, moisture or dust. Please don’t project the beam onto combustible substances. The minimum
distance between light-output from the projector and the illuminated surface must be more than
0.5 meter.
If you use the quick lock cam in hanging up the fixture, please make sure the quick lock fasteners
turned in the quick lock holes correctly.
Operate the fixture only after having familiarized with its functions. Don’t permit operation by
persons not qualified for operating the fixture. Most damages are result of unprofessional
operation.
Please use the original packaging if the fixture is to be transported.
For safety reasons, please be aware that all modifications on the fixture are forbidden. If this
fixture will be operated in any way different to the one described in this manual, the product may
suffer damaged and guarantee becomes void. Furthermore, any other operation may lead to
short-circuit, burns, electric shock, crash, etc.
SAFETY INSTRUCTIONS
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a
dangerous electric shock when touching wires.
This fixture has left the factory in perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and
warning notes written in this user manual.
1.
In order to guarantee the product’s life, please don’t put it in the damp places or even the
environment over 60degress.
2.
Always mount this unit in safe and stable mater.
The qualified professionals are allowed to carry out the lamp installation, operation and
maintenance, but they must guarantee to operate in strict accordance with the instructions referred
to.
Important
Damages caused by the disregard of this user manual are not subject to warranty.
The dealer will not accept liability for any resulting defects or problems.
If the fixture has been exposed to temperature changes due to environmental changes, don’t switch
it on immediately. The arising condensation could damage the fixture. Leave the fixture switched
off until it has reached room temperatures.
This fixture falls under protection-class I. Therefore it is essential that the fixture be earthed.
The electric connection must carry out by qualified person.
Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case,
replacement of the cable must be done by an authorized dealer.
