ARTEX ME406 Скачать руководство пользователя страница 67

Страница: 67 / 72

ARTEX PRODUCTS / ACR ELECTRONICS, INC

DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL

ME406 (453-6603), ME406HM (453-6604)

Page 67 of 72

Mar 19/15

25-62-30

ILLUSTRATED PARTS LIST

TASK 25-62-30-990-801

Introduction

SUBTASK 25-62-30-990-001

Purpose

This illustrated parts list (IPL) illustrates and lists the spare parts, with attaching hardware, applicable to

the ME406 Series ELT.

Parts and components not listed herein, are not field replaceable and ELT repairs requiring parts outside

the scope of this manual must be accomplished by the manufacturer.

SUBTASK 25-62-30-990-002

IPL Usage Guide

If the part number is not known:
a)

Find the part in the IPL Figure illustration.

Note the item number assigned to the part.

Refer to the associated parts list and find the item number in the “Fig # & Item” column.

If the part number is known:
a)

Refer to the parts list and find the part in the “Part #” column.

Note the figure number and item number assigned to the part.

Refer to the illustration in the applicable IPL figure to find attaching hardware and related assembly

parts.

In cases where multiple item numbers are shown on an illustration for the same item, there is more than

one part number option associated with that item.

TASK 25-62-30-990-802

Manufacturer Name and Address

SUBTASK 25-62-30-990-001

Ordering Information

Approved parts may be ordered from ACR Electronics, or any authorized dealer.

CONTACT INFORMATION

Sales, ACR Electronics, Inc. / Artex Products

5757 Ravenswood Rd

Fort Lauderdale, FL 33312-6645 USA

Phone: (954) 981-3333

Fax: (954) 983-5087

Содержание ME406









































































Результаты поиска

Содержание ME406

Отзывы:

Похожие инструкции для ME406

Бренды по названию

Популярные бренды

ARTEX ME406, Описание, эксплуатация, установка и техническое обслуживание

Результаты поиска

Содержание ME406

Отзывы:

Похожие инструкции для ME406

Бренды по названию

Популярные бренды