ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
B406-4 (453-5004)
Page 41 of 70
25-62-03
TASK 25-62-03-500-801
3.
Material or Equipment Return
SUBTASK 25-62-03-510-001
A.
Shipment Information
1)
If any material or equipment is to be returned to the factory, under warranty or otherwise, ACR
Electronics must be notified prior to shipment with the following information:
a)
Model and serial number of equipment being returned,
b)
Date purchased,
c)
Date placed in service,
d)
Number of hours in service,
e)
Nature and cause of failure, and
f)
Remarks, if any.
SUBTASK 25-62-03-580-001
B.
Return Material Authorization
1)
Upon receipt of such notice, ACR Electronics will issue a Return Material Authorization (RMA) number
which then authorizes return of the material or equipment to the following address:
Repair and Overhaul
ACR Electronics
5757 Ravenswood Road
Fort Lauderdale, FL 33312 USA
Phone: (954) 981-3333
Fax: (954) 983-5087
a)
Failure to obtain a RMA number and provide the details listed in SUBTASK 25-62-03-990-002 may
cause unnecessary delay and/or rejection of the returned material or equipment.
b)
All material or equipment returned to the factory must be freight prepaid.
c)
Acceptable methods of shipment for international return are Airborne, Burlington Air, DHL, Emery,
Federal Express, UPS International, and World Wide only.
NOTE:
Do not use “International Commercial Airlines”, such carriers may cause a loss of returned
material or equipment.
