
GB
Temperature settings
Standard model
• Your Vin&O is preset in the factory in order to obtain 6°C in the lower section
and 18°C in the upper section (±2°C)
• Temperature setting is carried out using a room thermostat (see description page 4-5):
hot thermostat: located in the upper section
cold thermostat: located in the lower section
• The standard setting is obtained according to the model:
Standard T°
Cold thermostat
Hot thermostat
Vino 80 B
6 - 18
6
18
Vino 120 B
6 - 18
6
18
• Adjustment
It is possible to increase or lower temperatures. The same difference between
the two thermostats must be maintained.
• In all cases, it is necessary to wait 48 hrs before noticing the effects of a tem-
perature adjustment.
• The indicated settings are standard settings given for an ambient temperature
of approximately 20°C. Depending on the external temperature and/or change
and/or installation conditions, they may require adjustments.
Do not allow the glass door to be exposed to direct sunlight.
HOT
COLD
HOT
COLD
The thermostat setting values are not temperatures in degrees but index values.
An index value corresponds to approximately 1°C.
Lower : move the index values of the 2
thermostats downwards.
Increase: move the index values of the 2
thermostats upwards.
English - P 15
internal temperature is displayed.
The lower section is designed for cooling – setting between 6°C and 8°C -
it is not therefore recommended that you leave bottles there.
The upper section is designed for setting between min.: 14°C and 16°C
max.:16°C and 18°C
In these conditions, the maturing zone temperature is between 11 and 13°C.