Artesyn Embedded Technology ATCA-7370, Инструкция по установке и эксплуатации

Страница: 19 / 252

ATCA-7370/ATCA-7370-S Installation and Use (6806800P54G)
19
About this Manual
Overview of Contents
This manual is intended for users qualified in electronics or electrical engineering. Users must
have a working understanding of Peripheral Component Interconnect (PCI), AdvancedTCA®,
and telecommunications.
The manual contains the following chapters and appendices:

About this Manual on page 19 lists all conventions and abbreviations used in this manual
and outlines the revision history.

Safety Notes on page 25 lists safety notes applicable to the blade.

Sicherheitshinweise on page 31 provides the German translation of the safety notes section.

Introduction on page 37 describes the main features of the blade.

Hardware Preparation and Installation on page 45 outlines the installation requirements,
hardware accessories, switch settings, installation and removal procedures.

Controls, Indicators, and Connectors on page 61 describes external interfaces of the blade.
This includes connectors and LEDs.

BIOS, on page 75 describes the features and setup of BIOS.

Functional Description on page 103 describes the functional blocks of the blade in detail.
This includes a block diagram, description of the main components used and so on.

Maps and Registers on page 113 provides information on the blade’s maps and registers.

Serial Over LAN on page 175 provides information on how to establish a serial-over LAN
session on your blade.

Supported IPMI Commands on page 181 lists all supported IPMI commands.

FRU Information and Sensor Data Records on page 227 provides information on the blade’s
FRU information and sensor data.

Troubleshooting on page 247 , lists the errors, and describes the reasons and solutions to
the problems.

Related Documentation on page 249 provides links to further blade-related
documentation.