2. Attaching the Pedal Board.
3. Attaching the Back Panel and Piano Body.
F
G
G
F
Starting with the right Stand Leg, align the holes in the Pedal Board
with the holes in the Pedal Board Bracket as shown. Make sure that
the pedals are facing towards the front of the Stand Legs.
Thread two Pedal Board Bolts (F) through the Pedal Board
and into the bracket. Repeat with the left Stand Leg and
tighten all bolts fully. Place the four Plastic Caps (G) over the
Cylindrical Nut openings.
E
E
E
E
D
D
PLEASE NOTE
When lifting the piano onto its stand, be careful
not to catch/trap hands or fingers.
!
slide forward,
With help from another person, lift the piano onto the stand
and slide forwards, pushing the guide rods on the bottom of
the piano into the slots on the Stand Legs, as shown below.
Using two BackPanel Bolts (D) with washers, and four Back
Panel Screws (E) with washers, attach the Back Panel to the
stand. Please note that the pedal board is not predrilled for
the Back Panel screws, and they must be driven in manually.
