Page 2
Hexi
Split® 1706 User’s Manual
User Manual
Artel Video Systems’
Hexi
Split® for Video
Contents
This product is supplied with the following components:
1 HexiSplit for Video
1 Power Supply (a power cord may also be included on 220 Vac models)
1 User’s Manual and Product Registration card
Welcome
Thank you for purchasing this fine distribution amplifier (splitter) for composite
video.
This product allows you to distribute a single video signal to up to 6 monitors
simultaneously. You may also distribute the signal to any composite-video based
equipment. Each connection can be located up to 250 feet away from the splitter.
Features
Key features of these splitters are:
300 MHz bandwidth
Independently buffered outputs
Full bandwidth on both Y and C channels
Operation
1. Connect a video cable from the video output of the computer or video equip-
ment to the connector on the rear of the splitter marked VIDEO IN.
2. Connect one or more video monitors or video equipment to any or all of the
MONITOR outputs.
3. Extension cables may be used to support monitor lengths to 250 feet. Artel
Video Systems sells these extension cables in various lengths. Contact your dealer
for details.
4. Plug the power supply supplied into the jack on the rear of the splitter marked
POWER.
5. Plug the power supply into a 110Vac or 220Vac wall outlet as appropriate. The
front panel LED should glow red indicating the unit is properly powered.
6. The monitor(s) or video equipment will now display the input signal.
