Artel DigiLink DLC170, Установка и эксплуатация

Страница: 25 / 50

DLC170 Function Modules Installation and Operations Manual 15
Understanding and Using the DLC170AD
7. Insert the audio cable connector into the module’s cable connector as shown in Figure 9 .
Figure 9. DLC170 Audio Cable Connector
8. Secure the audio cable connector to the module using the two connector mounting screws.
9. Use the cable mounting screws to secure the audio cable connections described in the “Cabling the Audio
Connections” section on page 16 .
Note:
Insert a blank tray in any unused chassis module slots to maintain proper ventilation.
Cabling the DLC170 Modules
The DLC170 allows you to transmit and receive signals over electrical and fiber optic cable connections. The
cabling configuration that you use depends on your application. You can have electrical in and out, optical in
and out, or any combination of the two. Use the information that this section contains to cable either a
DLC170AD or a DLC170DA module. The electrical and optical connectors are located on the rear panel of the
DLC170 (see Figure 10 ).
Figure 10. DLC170 Electrical and Optical Connectors
Connector Mounting
Screws (2)
Cable Mounting
Screws (12)
Audio Cable Connector
DLC170AD Rear Panel
DLC170DA Rear Panel