OPERATION GUIDE
1)Access Program Mode
Press and hold down "ON/OFF" and "SCENE1" for 5 seconds to
access Program Mode. The ON/OFF flashes on and off.
Press and hold down "M1" and "M2" for 5 seconds may swap
between Program Mode 1 and Program Mode 2. The factory
setting (default) is Program Mode 1.
Program Mode 1(Edit a Scene)
Swapping of Program Mode 1 and Program Mode 2
~2~
1)In user mode, press and hold on any a figure button for 0.5 second that can raise Scene 1~8,
just then use DIM-SLIDER to adjust the master intensity level for the raised Scene.
User Mode
2)Tap any a figure button may select DMX channel 1~8 for the current scene, now use
DIM-SLIDER can adjust the DMX value for the selected Scene.
If the interval of pressing button is less than 0.8second, the operator can select
the more channels.
Note:
Raise a scene
Adjust intensity
Select a channel
Adjust DMX value
Program Mode 1 & Program Mode 2
