Artecta A9915045, Руководство пользователя

Страница: 16 / 28

15
Ordercode: A9915045
LED Dim 12
1.3.2. DMX Addressing
In this menu you can set the DMX starting address.
01) Press the UP/DOWN buttons until the display shows .
02) Press the OK button to open the menu.
03) Press the UP/DOWN buttons to select the DMX starting address. The adjustment range is 001–512.
04) Press the OK button to save changes.
1.3.3. DMX Error
In this menu you can set the device’s behavior in case of a DMX signal error.
01) Press the UP/DOWN buttons until the display shows .
02) Press the OK button to open the menu.
03) Press the UP/DOWN buttons to select YES or NO:
●
YES: The device will use last properly received DMX signal, ensuring undisrupted performance.
● NO: The device will black out the light output.
04)
Press the OK button to confirm your choice.
1.3.4. Glide
In this menu you can activate/deactivate the fade time.
01) Press the UP/DOWN buttons until the display shows .
02) Press the OK button to open the menu.
03) Press the UP/DOWN buttons to select YES or NO:
●
YES: Fade time ON
● NO: Fade time OFF
04)
Press the OK button to confirm your choice.
1.3.5. DMX Status
In this menu you can view the DMX status.
01) Press the UP/DOWN buttons until the display shows or .
(DMX OK: DMX signal present; NO DMX: DMX signal not present) .
2. Load (Color Modes)
In this menu you can set the color modes.
01) Press the UP/DOWN buttons until the display shows .
02) Press the OK button to open the menu.
03) Press the UP/DOWN buttons to select the desired color mode: RGB (red, green, blue); RGBW (red,
green, blue, white); WHITE or WW+CW (warm white+cool white).
04) Press the OK button to confirm your choice.
3. Software Version
In this menu you can view the currently installed software version.
01) Press the UP/DOWN buttons until the display shows .