Artecta A0320220 Скачать руководство пользователя страница 4

 

 

 

3 

 

  

 

 

Newark 30W CCT Zoom 20°-60° 

Product code: A0320220/A0320221 

1.

 

Introduction 

 

Before Using the Product 

 

Important 
Read and follow the instructions in this user manual before installing, operating or 
servicing this product. 

The manufacturer will not accept liability for any resulting damages caused by the non-observance of 
this manual. 

After unpacking, check the contents of the box. If any parts are missing or damaged, contact your 
Highlite International dealer. 

Your shipment includes: 

 

Artecta Newark 30W CCT Zoom 20°-60° 
(including track adapter) 

 

User manual 

 

 

Fig. 01 

 

Intended Use 

This device is intended for use as an architectural light spot. It is suitable for indoor installation in 
commercial and residential buildings

. This device is suitable for household illumination. 

Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use. 

 

LEDs Lifespan 

The light output of the LEDs gradually decreases over time (lumen depreciation). High operating 
temperatures contribute to this process. You can extend the lifespan of the LEDs by providing adequate 
ventilation and operating the LEDs at the lowest possible brightness. 

 

Text Conventions 

Throughout the user manual the following text conventions are used: 

 

References: 

References to chapters and parts of the device are in bold lettering, for example: 
“Refer to 2. Safety”, “turn the adjustment handle (05)” 

 

Notes: 

 

Note: (in bold lettering) is followed by useful information or tips 

 

 

Содержание A0320220

















Отзывы: