Artecta 50 SW, Руководство пользователя

Страница: 21 / 24

20
Display Track Profile 50 SW
Product code: A0320160 / A0320161
6. Troubleshooting
This troubleshooting guide contains solutions to problems which can be carried out by an ordinary
person. The device does not contain user-serviceable parts.
Unauthorized modifications to the device will render the warranty void. Such modifications may result in
injuries and material damage.
Refer servicing to instructed or skilled persons. Contact your Highlite International dealer in case the
solution is not described in the table.
Problem Probable cause(s) Solution
The device does not
function
No power to the device
● Check if the track system is connected
to the power supply
Main fuse is blown
● Replace the fuse. See 7.3.1. Replacing
the Fuse on page 21
LEDs are damaged
● Disconnect the device and contact
your Highlite International dealer
No light or LEDs cut
out intermittently
The power supply settings do not
match local AC voltage and
frequency
● Disconnect the device. Check the
settings and correct, if necessary
7. Maintenance
Safety Instructions for Maintenance
DANGER
Electric shock caused by dangerous voltage inside
Disconnect power supply before servicing or cleaning.
Preventive Maintenance
Attention
Before use, examine the device visually for any defects.
Make sure that:
● All screws used for installing the device or parts of the device are tightly fastened and are not
corroded.
● There are no deformations on housings, fixations and installation points.
● The lens is not cracked or damaged.
● The interconnecting power cable is not damaged and does not show any material fatigue.