EN
Installation
EXCLUSIONS OF THE WARRANTY
Defects caused by incorrect handling are not covered by the warranty.
ENVIRONMENTAL CARE
Paper, plastic and other materials should be separated into the appropriate containers when throwing
away the packaging.
It is recommended that the installation be carried out by an authorized installer.
Attention!
Disconnect the water connection before being manipulated and make the product change only then.
FAULT AND RESOLVENT
No partial flush
Check the fill water level whether is higher than
the partial float. If not, adjust the water level
higher or adjust the float lower.
No flush or flush less after push down the button
1. Check the button whether is pushed to the
proper position.
2. Check the button rod whether is too short. If
yes, adjust the adjustment rod’s length.
Note: It is normal that water flows from the inside of the toilet in a moment after the flush.
Attention: Reduce the siphon to adapt it to the overflow level.
