ARTECH Fonkorder1, Руководство пользователя

Страница: 25 / 51

22
Note: please select the correct device ID for current device setting.
(4). Line number setting
You can set the real number for this line.
(5). Startup recording condition setting
fonkorder1 provides 3 ways for startup recording:
Record all: When start recording time is out or received polarity reversal will
startup the recording immediately.
Note 1: Press application [Cancel record] can forcibly cancel recording.
Note 2: During recording mode while talking, you can press hot key to cancel
recording, the default hot key for stop recording is: [*22].
All not recording: Don
’t record on any inbound/ outbound call.
Note 1: Press [Record compulsory] bar can forcibly cancel the recording.
Note 2: During talking mode, you can press hot key to do forcibly recording,
the default hot key for start recording is: [*11].
Recording conditions: Provides multiple conditions for startup recording,
such as timing, polarity reversal and hot key, you can select any of them as
per you exactly needs, you can also select all of them to assure all conditions
for startup recording.
(6). Hot key for start recording setting
During talking mode, you can press hot key to do forcibly recording, the
default hot key for start recording is: [*11].
(7). Hot key for stop recording setting
During recording mode while talking, you can press hot key to cancel
recording, the default hot key for stop recording is: [*22].
(8). Prompt voice for recording setting
Voice announcement for start recording:
This setting is used to remind recording is started for user, you need select
this item, you can use system default prompt voice, or you can select other
voice as per your needs.
Prompt voice during recording process
:
This setting is used to remind the recording is in progress as per every
scheduled interval (default is 5 second), you can control volume level for
prompt volume grade (default is 6 grade).
(9). Advanced setting
After entered will display below window:
fonkorder1 scheduled setting for line setting is basically in accordance with
telecom standard, if there
’s any difference or under special circumstances,
you can change the scheduled setting according to exactly requirements.