arte confort ITAPARICA, Инструкция по эксплуатации

Страница: 19 / 28

EN
19
1. Cut the fan A current*
Be sure to cut the fan A current (the one we want
to remove the synchronization).
B
A B
A
2. Cut the fan B current*
Be sure to cut off fan B (the one we want to
synchronize).
B
A B
A
3. Restore fan B current
When you restore the fan B, press the “FAN ON/
OFF” button within 5 seconds until you hear the
signal to synchronize remote control B with fan B.
B
A B
A
A REMOTE CONTROL TO A FAN
(Example for two fans, applicable to a larger number of fans)
4. Cut the fan B current*
Be sure to cut the fan B current.
B
A B
A
5. Restore the fan A current
When you restore the fan A press the “FAN ON/
OFF” button within 5 seconds until you hear the
signal to synchronize remote control A with fan A.
B
A B
A
6. Repeat the steps
Repeat steps with each fan you have and want to
individualize its remote control.
B C A
*To cut the current you can press the individual
fan switch. If there is not, disconnect the quick
connect cables from the fan.