Quick Installation Guide
IPF-3000
-13-
3.
Date/Time
z
Choose the item and press
【
HOLD
】
to configure:
1.
Date: System date
2.
Time: System time
3.
Date format: date displaying format
4.
Time zone (default is GMT+00:00
）
Use digits key
【
0
】
~
【
9
】
to switch b/-
5.
DST settings (day-light saving time, default is 0:00)
Note:
if you want to keep the date and time you manually set, you must disable SNTP
synchronization from 7.3.1-SNTP Mode; otherwise, it will synchronize system
time with assigned NTP server.
4.
Ringer
1.
Ringer volume: (Adjust the ringing volume on incoming calls arrival).
z
【＋】
and
【－】
to increase or decrease ringing volume.
2.
Ringer type: (Pick your favorite ringing tone)
z
【＋】
and
【－】
to listen your favorite ringing, press
【
HOLD
】
to save your
setting.
z
To enable “13. User-defined” ringing tone, you must first record it via handset.
3.
Record ring: (Personalize user-defined ringing tone)
z
Pick up handset to prepare for ring recording.
z
Press
【
HOLD
】
to start recording your own ringing tone.
z
On finish, press another
【
HOLD
】
to stop recording ringing tone.
z
You can review the newly recorded ringing tone or press “1.Save” to replace the
originally “13.User-defined” ringer type. Press
【
FUNC
】
to re-record again.
z
You can record nearly 8 seconds customized ringing tone.
5.
Lock
z
『
Main Menu
』
=>
『
3.Phone settings
』
/
『
8. Lock
』
z
『
1.=Y
』
to lock out the phone such that it could not make outbound calls (but still could
take incoming calls, or
『
2.=N
』
to cancel this operation and press
【
HOLD
】
to confirm.
After locking out the phone, to unlock it, you need the phone password.
