QIG of IPF-2002L
4
Step 2.
Hardware Installation
：
2-1
：
Prepare your Internet information, and then follow the steps below to install your
IPF-2002L.
Cable ISPs usually provide DHCP to its subscribers, and each time they only allow one
user to logon. Therefore, most ISPs require their subscribers report the MAC address of
their internet device to allow them to use the service. If you want to apply another
account for IPF-2002L, just simply report the MAC address of your IPF-2002L to your
ISP provider.
If you want to use multiple internet devices in the same time, you need a router to
connect to the ISP, and connect your internet devices to the router. Then replace the
original MAC address to your router’s MAC address
(1)
For the Cable ISP subscriber
：
Plug one end of the RJ-45 cable to one of the LAN port on the IPF-2002L, and plug
another end to one of the LAN port of your router. Once “Ready for call” is shown on the
screen, the hardware installation is completed. There is another LAN port available for
you to connect to another internet device or to your PC.
< Connection with a router >
：
W
AN
LA
N
1
2
3
4
2-1