- 12 -
TUBE MP STUDIO SPECIFICATIONS
Dimensions
5.0”H x 5.5” W x 2.0”H
Weight
1.5 lbs.
Input Connections
XLR (balanced), ¼”TS
Output Connections
XLR (balanced), ¼”TS
Input Impedance XLR, ¼”
2K ohms, 840k ohms
Output Impedance XLR, ¼”
600 ohms, 300ohms
Maximum Input Level, XLR
+14dBu
Maximum Input Level, ¼”
+22dBu
Maximum Output Level, XLR
+28dBu
Maximum Output Level, ¼”
+22dBu
CMRR
>75dB (typical @ 1kHz)
Frequency Response
10Hz to 30kHz, +/-.5dB
Dynamic Range
>100dB (20-20kHz) typical
Total Harmonic Distortion (THD)
<0.1% (typical)
Maximum Gain
XLR to XLR
60dB (typical)
¼” to ¼”
44dB (typical)
XLR to ¼”
54dB (typical)
¼” to XLR
50dB (typical)
Equivalent Input Noise (EIN)
XLR to XLR
-129dBu (A weighted)
¼” to ¼”
-105dBu (A weighted)
Tube Type
12AX7A, Dual Triode, Hand Selected
Power Requirements
USA – 9VAC @ .8A (typ.) Export units
configured for country of destination
ART maintains a policy of constant product improvement. ART reserves the right to
make changes in design or make additions to or improvements upon this product
without any obligation to install same on products previously manufactured. Therefore,
specifications are subject to change without notice.
Applied Research & Technology
215 Tremont Street
Rochester, NY 14608 USA
(716) 436-2720
(716) 436-3942 (FAX)
www.artproaudio.com
© 2000 Applied Research & Technology
