Art DUALXDIRECT, Руководство пользователя, Страница: 6 / 14

INSTALLATION and OPERATION:
1. Connect your instrument, line, or speaker level
signal to either of the
INPUT 1 or 2 1/4" TRS phone
jacks or female XLR connectors. Connect one end of a
phone jack cable to the corresponding
THRU 1/4' TRS
phone jack and the other end to where your signal was
going to, if connecting the DUALXDirect inline in the
signal path. Repeat for the other
INPUT and THRU
jacks if desired.
2. Connect a balanced line cable between the
corresponding
OUTPUT 1 or 2 male XLR connector on
the rear panel and the balanced inputs of your audio
gear. Repeat for the other
OUTPUT if desired.
3. If phantom power is not available, make sure a 9V
battery is installed and push the
POWER switch in to
enable battery power. When using a battery for power,
be sure to turn the
POWER switch off when not using
the unit in order to maximize battery life. If phantom
power is available, there is no need to push the
POWER
switch in. Power is always applied from the OUTPUT
connectors, if present. A green LED lights if power is
coming from the
OUTPUT 1 connector, a red LED lights
if power is coming from the OUTPUT 2 connector. Both
LEDs light if power is coming from both connectors.
4. Set the input ATTENUATOR switches for best
signal strength and clarity. Select the GROUND LIFT