Art-Tech P-51D Gunfighter, Инструкция по эксплуатации

Страница: 14 / 18

Valuable experience
1. If you have a simulator we recommend that you practice with it before you fly your J-3. This will be very
helpful for your first flight.
2. Check and make sure all the control surfaces work normally and move towards the right direction before
flying.
3. We recommend that you take the model up to a height of around 100m and then cruise at around 1/3
power. This will be helpful for ou to get familiar with the performance.
4. Users should control the airplane gently to reduce the risk of crash, and to prolong the working time of
the airplane.
5. The turning radius should not be too tight or the aircraft could become out of control very quickly which
could result in an incident that you did not intend.
6. Please make sure to take off into the wind. The beginners had better fly in breeze and up wing area.
Operating Manual for the radio control system
Components to the R/C system
a transmitter, a receiver, a servo, a speed controller
The sketch map for connecting the receiver:
RECEIVER
ER61-2.4GHz
CH
RECEIVER
ER61-2.4GHz
CH
Signal
(
White line
)
(Red line)
(Black line)
Left aileron
servo
Right aileron
servo
Motor
Battery
ESC
Elevator servo
Rudder servo
14
www.motionrc.com