Art-Tech MAG-180 SPOT Скачать руководство пользователя страница 11

Страница: 11 / 16

DMX Personalities

The 180W Moving Head Spot has an 16-channel personality

To select DMX personality to use, follow the steps below:

1. Press <MENU> repeatedly until RUN MODE, SETTINGS,

SPECIAL on the display

2. Press <UP> or <DOWN> to select RUN MODE

3. Press<UP> or <DOWN> to select DMX512

4. Press<ENTER>

Setting Address

To select the starting address, do the following:

1. Press <MENU> repeatedly until RUN MODE, SETTINGS,

SPECIAL on the display

2. Press <UP> or <DOWN> to select RUN MODE

3. Press<UP> or <DOWN> to select DMX512

4. Press<UP> or <DOWN> to select Address

5. Press<UP> or <DOWN> to set Address

6. Press<ENTER>

Sound-Active Mode

To enable the Sound-Active mode, do the following.

1. Press <MENU> repeatedly until RUN MODE, SETTINGS,

SPECIAL on the display

2. Press <UP> or <DOWN> to select RUN MODE

3. Press<UP> or <DOWN> to select Sound

4. Press<ENTER>

Automatic Mode

To enable the Automatic mode.

1. Press <MENU> repeatedly until RUN MODE, SETTINGS,

SPECIAL on the display

2. Press <UP> or <DOWN> to select RUN MODE

3. Press<UP> or <DOWN> to select Auto1 or Auto2

4. Press<ENTER>

Содержание MAG-180 SPOT

















Результаты поиска

Содержание MAG-180 SPOT

Отзывы:

Похожие инструкции для MAG-180 SPOT

Бренды по названию

Популярные бренды

Art-Tech MAG-180 SPOT, Руководство пользователя

Результаты поиска

Содержание MAG-180 SPOT

Отзывы:

Похожие инструкции для MAG-180 SPOT

Бренды по названию

Популярные бренды