Arroyo Instruments LaserMount 234B, Руководство пользователя

Страница: 3 / 24

234B Series TEC TO-Can LaserMount U ser’s Manual · Page 3
Introduction
Thank you for choosing the 234B TEC TO-Can LaserMount from Arroyo
Instruments. The 234B LaserMount is designed for high performance and long
term use.
The 234B LaserMount is a higher performance TO-can mount, similar to our
smaller 224 LaserMount , but offering a much higher thermal capacity (up to
10W at 25°C), lower operating temperatures, and a much higher 3A higher laser
current capacity. The 234B integrates dual Peltier coolers for precise control of
the package temperature. With an operating range of -5°C to +85°C, the 234B
LaserMount covers a wide range of temperature control needs.
The 234B has a cover plate with a small opening whose face is close to the
diode as well as mounting holes for 30mm CAGE systems. For applications
using 1” le ns tubes, there is an optional 234-C-02 cover plate, which replaces
the small opening with a larger, 1” threaded opening compatible with 1” lens
tube systems.
When coupled with the 234-OFFSET-KIT , the 234B can be used with 2-pin 1mm
offset mounted lasers from manufacturers such as the Nichia, Mitsubishi, and
others.
The mount requires no wiring thanks to a simple configuration switches
conveniently located on the rear of the fixture. 234B LaserMount is also finned
to provide the highest heat dissipation capability, and is designed to be posted
mounted (post mount not included).
The 234B LaserMount also offers all the features you would expect from a
modern TO-Can laser diode fixture, including:
•
Designed to be quickly integrated with Arroyo’s LaserSource and
TECSource instruments.
•
Industry-standard D-sub connectors and pin-outs allow for quick
integration into existing laser applications.
• Banana plug for case ground, which can be used as a wrist strap
connection or to assure proper grounding to an optical table or test
bench.
Note: photos in this manual may show a CAGE system or post mount. The 234B does not
come with either of these systems; they are shown for illustrative purposes only.