7.
Connect a USB cable from PC to the mini B connector on the underside of the board. The board will power up.
8.
In Control Panel, open the “Devices and Printers” page to identify the COM port number assigned to the board.
9.
Open a serial terminal program to connect to the board’s console output. Recent versions of Windows™ do not
include a serial terminal program. Renesas cannot provide any recommendations; however, we have tested PuTTY,
TeraTerm with this product. Other terminal programs are available.
3. Running the Demonstrations
10.
The demonstrations assume that your network is configured for DHCP and an internet connection is configured.
a.
If your network cannot support this configuration, please see the support section below for fixed IP
configuration.
11.
On the Web Interface, (see 2) select the “Demos” tab.
12.
Select one of the Demonstrations presented.
13.
Follow the instructions on the page. Detailed instructions for each application are included in an associated
Application Note.
4. Next Steps
14.
When you have experienced the demonstrations, to go further by reviewing the code and making any changes,
please return to the “Setup” tab.
15.
Press the Install e
2
studio button, and the installation of the tools and demonstration source code will begin.
16.
Please refer to “description.txt” in each sample project for sample code specification and operating procedure.
17.
The Hardware Manual supplied with this Stream it! kit is current at the time of publication. Please check for any
updates to the manual from the Renesas website.
18.
To learn more on how to use e
2
studio, open the program’s help files by using Help > Help Contents.
Содержание verical RENESAS YSTREAM-IT-RZ-V2
Страница 5: ......
