180°
Tapered edge facing forward.
Assembly Instructions
SUZI Storage Sidekick
Page 6
Step 6.
Place Top (E) on the floor, guide sides (C,D)
and Back (B) assembly onto Connecting bolts with
the opening facing the tapered edge of Top panel
(E), turn Cams to locked position. Attach Bottom
(F) w/casters, guide Connecting Bolts into holes
in sides (C,D), turn Cams to locked position (as
shown in FIG. 6).
Step 7.
Laying Caddy on its Back (B), attach Door
(G) using #4x1/2” Gold Flathead screws (x8).
Attach Door Knob onto the Door (G) as shown
below in FIG. 7. Attach Strike Plate with #4x1/2”
Bronze Flathead screw (x1), to Door (G).
Note:
Caddy is being assembled upside down.
FIG. 6.
FIG. 7.
Remember to tighten the
cams down on ALL pieces
once completed!
#4x1/2”
Gold Flathead Screws
x8
#4x1/2”
Bronze Flathead Screw
x1
#8/32x1”
Door Knob Bolt
x1
Door Knob
x1
E
F
B
C
D
G