Assembly Instructions
Shirley
12
Part Two: Drawers
To reach the pre-drilled screw holes on the sides of
Panels K1 and K2,
you will need to tilt the drawer
runners.
Remove the front and back screws on the drawer
runners, leaving the middle screw installed. Pivot the
drawer runners to access screw holes as shown above.
Attach back
Panel K3
using
s3 Screws
.
Realign drawer runner and replace screws on drawer
runner as shown below.
Repeat x3 (4 drawers total)
Our customer service agents are ready to help! Call
us at 1-800-533-7347, ext. 1.
3.5x35 Screw
x16
s3
K1
K2
K3
x4