Metal Dowels
x2
180°
Assembly Instructions
OLIVIA Sewing Cabinet
Page 4
*DO NOT OVERTIGHTEN #6x1”
Flathead Screws. Make sure
the screw heads are flush with
plastic.
#6x1”
Flathead Screw
x16
FIG. 2.
FIG. 2B.
FIG. 3.
#7x5/8”
Flathead Screws
x2
Step 3.
Lay Outside Side Panels (C, M) on a flat
surface with Cams facing up. Attach Back Panel
(F) to Panels (C, M) with Cams facing toward the
edge of (C, M), guide the Connecting Bolts into
holes on side edge of Panel (F) (As shown in FIG.
3). Tighten Cams (x4).
Note:
Panels (C, M) has no Connecting Bolts on
the reverse side.
Step 2.
Attach drawer runner (x1) each to Cabinet
Side Panels (C), (D), (L) and (M) using #6x1”
Flathead Screws* (x16) (See FIG 2). Screw Drawer
Stops (x2) into Right Side Panels (D) and (M) above
drawer runner using #7x5/8” Flathead screws
(x2). DO NOT tighten the screws completely, leave
1/4” for up and down swivel of the drawer runner
(See FIG. 2B). Insert Metal Dowels (x2) into pre-
drilled hole next to drawer stop.
M
F
F
C
D
M
L
C
