32
(QTY: 12)
CUT
Tape BOTH Gable joints before installing Roof Beams.
You will need for this page:
Tape should wrap around gap between Gables.
Weather Stripping Tape
Top View of Gables
Step 12: Roof Framing
Beam End Views
Angled side of Beams must face up.
Seal the gap between the
Gables
using the weather stripping tape as shown. Do
this at both ends of the building before installing
Roof Beams
.
1
2
Position the
Roof Beams
as shown below and install using two (2) bolts and nuts
per side. Install the
Main
(center)
Beam
fi rst.
32BH
Assemblies from Step 3:
• Main Roof Beam Assembly (1)
• Single Roof Beam Assemblies (2)
