Arrow Cyclone 10 LP RefKit Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 75

Arrow Cyclone 10 LP RefKit Скачать руководство пользователя страница 5

Cyclone 10 LP RefKit User Guide

www.arrow.com

Page | 5

February 2022

Cyclone 10 LP RefKit Development Board

1.1

About Arrow Cyclone 10 LP RefKit Board

The Cyclone 10 LP Reference Kit is a customizable development board  that targets all kinds of
applications with a wide range of interfaces. The board is based on Cyclone 10 LP FPGA, which is
optimized  for  low-cost  and  low-power  designs,  making  them  ideal  for  high-volume  and  cost-
sensitive  applications.  High-density  sea  of  programmable  gates  and  onboard  resources  allow
implementation  of  Nios  II  32-bit  microcontroller  IP,  which  provides  the  ideal  solution  for  I/O
expansion, chip-to-chip interfacing, industrial, automotive, and consumer applications.

The C10LP RefKit is equipped with an Arrow USB Programmer2, 2 ports 10/100Mbps Ethernet,
SDRAM, HyperRAM, flash memory, VGA, 8-channel ADC/DAC, PMODs, and ARDUINO connectors
making it a fully featured plug and play solution without any additional costs.

The C10LP RefKit board contains all the tools needed to use the board in conjunction with a
computer that runs a 64-bit Linux / Microsoft Windows 10 operating system or later.

1.2

Useful Links

A set of useful links that can be used to get relevant information about the Cyclone 10 LP RefKit
or the Cyclone 10 LP FPGA.

•

Cyclone 10 LP RefKit at Arrow Shop

•

Cyclone 10 LP RefKit at Trenz Electronic Shop

•

Intel Cyclone 10 LP Webpage

•

Cyclone 10 LP RefKit Wiki Page

«
...
3
4
5
6
7
...
»

Содержание Cyclone 10 LP RefKit












































































Отзывы:

Нет отзывов