Arrow Storage Products BGR1210FG, Руководство пользователя и инструкции по сборке, Страница: 17 / 73

1
Assemble 1/2 truss at a time,
using #10-32x7/16" (11 mm) bolts
and square nuts, on all connections
loosely.
2
Attach truss lower chord to truss
upper chord.
3
Attach 2 center gable braces to
the upper and lower chords at the
opposite end of truss.
4
Attach 2 truss diagonals to upper
and lower chords.
5
Attach 2 mid gable braces to up-
per and lower chords.
6
Attach 2 center gable braces to
upper and lower chords at middle of
truss.
7
Attach 2 outer gable braces to
upper and lower chords. Mount with
short leg of brace.
Step 1
BW14
Parts Needed For
Truss Assembly 12x17, 12x24 & 12x31
(3,7 m x 5,2 m / 3,7 m x 7,3 m / 3,7 m x 9,4 m) ONLY
7855 Truss Lower Chord (2)
7856 Truss Upper Chord (2)
6382 Center Gable Brace (8)
7739 Truss Diagonal (4)
6381 Mid Gable Brace (4)
6380 Outer Gable Brace (4)
7738 Splice Plate (1)
6382
6382
7739
7856
Short
Mounting
Leg
#10-32 Square Nut
#10-32x7/16" (11 mm) Bolt
7855
6380
6381
7738
Edge Trim
Mounting Flange of Brackets
Must Face Towards Center
Of Truss Assembly
IMPORTANT:
Square Up
Half Truss
8
Square up 1/2 truss, adjust and
tighten.
9
Make other half and square.
10
Splice both halves together
with splice plate and fasten center
gable braces together, using 3 bolts
and nuts.
11
Cut the 4 pieces of edge trim in
half and slip over the bottom edges
of gable braces. This trim is a must
to protect against injury from the
sharp edge.
NOTE
The day before construction of the building, complete the
sub-assemblies so they will be ready. EXAMPLE: Truss,
fl oor frames, roof beams, gables, side and overhead doors.
Set the assemblies aside, so they will not get damaged.
The remainder of the building assembly requires more than
1 work session and more than 1 person. Do not continue
beyond this point if you do not have enough time to complete
the wall assembly and can tie down the assembly overnight.
Complete the roof and doors on the following day.
Make 1 assembly for the 12x17 (3,7 m x 5,2 m)
Make 2 assemblies for the 12x24 (3,7 m x 7,3 m)
Make 3 assemblies for the 12x31 (3,7 m x 9,4 m)
16