Arrive ViewPoint 2240 Скачать руководство пользователя страница 3

Страница: 3 / 58

COMPLIANCE INFORMATION

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party: Arrive Systems, Inc.

Address: 6737 Katella Ave., Cypress CA 90630 USA

Telephone: +1-844-427-7483 (Toll Free)

Hour of operation: 9:00- 17:00

Type of Equipment: Arrive ViewPoint 2240

Model Name: AVP-2240- LCA

This unit complies with Part 15 of FCC Rules.

Operation is subject to the following conditions:

1) this unit may not cause harmful interference, and

2) this unit must accept any interference received the

including the interference that may cause undesired

operation.

See user manual instructions if interference to radio

reception is suspected.

This Unit complies with the requirements listed in

FCC regularizations, Part 15 for Class “A” Digital

units. If you are using cardiac pacemaker, please

note that this unit can radiate radio frequency

energy in the area near the product

FCC INFORMATION (for US customers)

IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the

instructions contained in the manual, meets

FCC requirements. Modifications not expressly

approved by ARRIVE may void your authority

granted by FCC to use the product.

IMPORTANT: When connecting this product to

accessories and/or another product, use only

high quality shielded cables. Cable/s supplied

with this product MUST be used. Follow all

installation instructions. Failure to follow

instructions could void your FCC authorizations

to use this product in the USA.

NOTE: This has been tested and found to comply

with the requirements listed in FCC regulations,

Part 15 for Class “A” digital units. Compliance

with these requirements provides a reasonable

level assurance that your use of this product in a

residential environment will not result in harmful

interference with other electronic units. This

equipment generates/uses radio frequencies

and, if not installed and used according to the

instructions found in the user manual, may cause

interference harmful to the operation of other

electronic units.

Compliance with FCC regulations does not

guarantee that the interference will not occur in

all installations, If this product is found to be the

source of interference ,which can be determined

by turning the unit “OFF” and “ON”, please try

to eliminate the problem by using one of the

following measures;

Relocate either this product or the unit that is

being affected by the interference.

Utilize power outlets that are on different

branch (circuit breaker of fuse) circuits or install

AC line filter/s.

In the case of radio or TV interference, relocate/

reorient the antenna. If the antenna lead-in is

300 ohm ribbon lead, change the lead-in to co-

axial type cable.

If these corrective measures do not produce

satisfactory results, please contact the local

retailer authorized to distribute this type of

product. If you cannot locate the appropriate

retailer, please contact Arrive Systems, Inc.

Address: 6737 Katella Ave., Cypress CA 90630

USA

The above statements apply ONLY to those

products distributed by Arrive Systems, Inc.

FOR CANADIAN CUSTOMERS

This Class A digital apparatus complies with Canadian ICES-003.

CE Declaration of Conformity (For EU Customers)

We, Arrive Systems, Inc., declare under our sole responsibility that the Arrive component to which this declaration

relates, is in conformity with General Emissions Standard EN50081-1 and with Generic Immunity Standard EN50082-1

1992.

Содержание ViewPoint 2240

























































Результаты поиска

Содержание ViewPoint 2240

Отзывы:

Бренды по названию

Популярные бренды

Arrive ViewPoint 2240, Руководство пользователя

Результаты поиска

Содержание ViewPoint 2240

Отзывы:

Бренды по названию

Популярные бренды