2
Choose your DDNS provider from the
DDNS Service
drop-down menu.
3
Enter your DDNS account name, password, and DDNS domain name in the
appropriate fields.
4
Click the
Update DDNS
button.
Note
: Your domain name may not be immediately associated with your cur-
rent IP address. Updated DNS information takes some time to propagate
across the Internet.
5
Proceed to
Configuring Wireless Bridging
.
Configuring Wireless Bridging
The Telephony Modem supports the Wireless Distribution System (WDS), a com mon
bridging standard that allows you to extend the range of a wireless network by con-
necting several wireless routers.
Keep the following in mind when setting up wireless bridging:
•
One device (in this case, the Telephony Modem) acts as the router. Other
wireless routers must be configured as Access Points. See the documenta-
tion for your additional devices for instructions for using them as Access
Points.
•
While the Telephony Modem has the ability to be configured as an Access
Point, doing so disables the router function and therefore disables Internet
access through the Telephony Modem.
•
Each wireless router must support WDS.
•
The Router and each Access Point must use the same channel number and
security settings.
•
If MAC address filtering is enabled, the router and each Access Point must
have the MAC addresses of the other devices in their access lists.
Follow these steps to set up wireless bridging. The steps assume you have already
configured the devices as described above.
Touchstone WTM652 Telephony Modem User’s Guide
Safety
Getting
Started
Battery
Installation
Installation
Wireless
Configuration
Ethernet
Configuration
Usage
Troubleshooting
Glossary
48
