Home
Prev Next
WBM650 Wideband Modem User’s Guide
16
Safety
Getting Started
Installation
Usage
Troubleshooting
Glossary
Instructions
Wall-mounting instructions
1
Position the mounting template on the surface where you intend to mount
the Wideband Modem and secure in place with transparent tape.
2
Drill holes through the template in the specified locations for the mounting
screws. After drilling holes, remove the template from the surface.
3
Drive both of the screws (or anchor bolts) into the wall. Leave a gap of about
6 mm (0.250 inches) between the screw head and the wall.
4
Orient the Wideband Modem with the indicator lights facing up. Slip both
mounting slots (in the back of the Wideband Modem) over the screws, then
slide the case down until the narrow end of the keyhole slot contacts the
screw shaft.
5
Proceed to
Connecting the Wideband Modem
.
Desktop mounting instructions
1
Position the Wideband Modem so that:
• air flows freely around it
• the back faces the nearest wall
• it will not fall to the floor if bumped or moved
2
Proceed to
Connecting the Wideband Modem
.
Step 1
Step 2
Step 3
Step 4
