Chapter 4
:
Battery Installation and Removal
Release 16 STANDARD 1.4 August 2016
Touchstone TM1602G Telephony Modem User Guide
© 2015-2016 ARRIS Enterprises LLC. All Rights Reserved.
22
4.
To remove the battery, grasp the battery and pull back on the latch at the front of the
battery. Then gently rock the battery out of the bay.
Note:
Telephony Modems use a Lithium-Ion battery pack. Please recycle or dispose of the
battery responsibly and in accordance with local ordinances.
Battery Usage and Storage Conditions
The life expectancy of your battery should be several years, provided that it was
purchased from an approved source.
Your battery goes through a calibration procedure when it is first installed or replaced.
This procedure can take up to 72 hours to complete and is repeated every six months.
If your battery becomes fully drained during a power outage, the calibration procedure
will need to be repeated.
Your battery should be installed in your Telephony Modem and kept there at all times. Do
not store the battery separately from the Telephony Modem for any prolonged period of
time.
Battery Disposal Guidelines
To ensure compliance with current and future rechargeable battery take-back laws, ARRIS has
joined Call2Recycle, a collection program for rechargeable batteries throughout North
America. US and Canadian customers should visit
recycle your lithium-ion battery backup units (BBUs).
Getting Battery Status
To assess whether the battery needs to be replaced, the Telephony Modem charges,
discharges, and recharges the battery pack as part of a battery test. The Telephony Modem
re-tests the battery periodically afterwards, usually every 180 days. The Battery LED and the
Registration Status screen indicate the status of the battery.
To view the Registration Status screen:
1.
Using a web browser, access
http://192.168.100.1/
You may have to manually adjust your
computer's IP address to (for example) 192.168.100.6 to access the HSD pages.
2.
Click the
CM State
link below the ARRIS banner.
3.
Scroll down, if necessary, to see the Power Supply Telemetry and Battery Test State
information at the bottom of the page. The expected states are:
•
Power Supply Telemetry: TELEMETRY NORMAL
•
Battery Test State: Not Currently Under Battery Test
