Configuring Your Wireless Connection
The TG952 ships with wireless LAN security set by default. See the security label
on your product (shown on image at the left) for the factory security settings: net-
work name (SSID), encryption method, network key, and WPS PIN.
Note:
You must set up your computer and other client devices to work
with the security settings on the TG952. Refer to the documen-
tation for your client device for instructions on setting security.
If your computer or client device supports WiFi Alliance WPS
(Wireless Protected Setup), activate WPS on your computer or
client device and the TG952 simultaneously to easily set up your
system security.
If you need to modify the Telephony Gateway’s default wireless security settings,
or if you want to configure any other wireless LAN settings, refer to the following
instructions.
Accessing the Configuration Interface
Follow these steps to access the configuration interface. You should have already set
up the TG952 as described in
Installing and Connecting Your Telephony Gateway
.
1 a)
If security has been properly set up on your computer to access the wire-
less LAN on the TG952, use the connection utility for your operating system
to connect to the wireless LAN using its network name (SSID), as shown on
the security label.
b)
If you cannot access the wireless LAN, you must first establish a wired
Ethernet connection between your computer and the TG952.
2
In your web browser, open the page
http://192.168.0.1/
to access the
wireless router setup.
The Login screen displays.
Note
: The default user name is “admin”. The default password is “pass-
word”, in lower case letters.
3
Enter the user name and password and click the
Apply
button to log in.
The System Basic Setup screen displays.
Touchstone TG952 Telephony Gateway User’s Guide
Safety
Getting
Started
Installation
Ethernet
Configuration
Usage
Troubleshooting
Glossary
22
Security Label
