Chapter 3
:
Installing and Connecting your Telephony Gateway
Release 16 STANDARD 1.0 May 2016
Touchstone TG1652S Telephony Gateway User Guide
© ARRIS Enterprises, LLC, 2016. All Rights Reserved.
23
3.
Connect one end of the Ethernet cable to any Ethernet port on the back of the Telephony
Gateway, (4) and the other end to the Ethernet port on a computer, hub, or broadband
router.
Note: If you are connecting to a computer, use the Ethernet cable included in the
Telephony Gateway package.
4.
Connect one end of the telephone cable to the telephone port on the back of the
Telephony Gateway (2 or 3). Connect the other end to the telephone.
Configuring Your Wireless Connection
The TG1652S ships with wireless LAN security set by default. See the security label on your
product for the factory security settings: network name (SSID), encryption method, network
key, and WPS PIN.
Note: You must set up your computer and other client devices to work with the security
settings on the TG1652S. Refer to the documentation for your client device for instructions on
setting security. On most computer systems you only need to select the network name (SSID)
device and enter the encryption key. If your computer or client device supports Wi-Fi Alliance
WPS (Wireless Protected Setup), activate WPS on your computer or client device and the
TG1652S simultaneously to easily set up your system security.
If you need to modify the Telephony Gateway’s default wireless security settings, or if you
want to configure any other wireless LAN settings, refer to the following instructions.
