PN 365-095-30001 x.1
Touchstone CM8200 Cable Modem User Guide
Copyright 2016, ARRIS Enterprises, LLC. All rights reserved.
13
Chapter 4
Installing the Cable Modem
Caution: This product is for indoor use only. Do not route the Ethernet cable(s) outside of the
building. Exposure of the cables to lightning could create a safety hazard and damage the
product.
Connect the CM8200 to Your Computer
Before installing the CM8200:
Check with your service provider to ensure broadband cable service is available in your
area.
Choose a location in your home where your computer and cable modem are preferably
near existing cable and electrical wall outlets.
Figure 4:
CM8200 Connection Diagram
1.
Check that a coaxial cable is already connected to a cable wall outlet or RF splitter
(optional).
2.
Connect the other end of the coaxial cable to the Cable connector on the rear of the
CM8200.
Use your hand to tighten the connectors to avoid damaging them.
3.
Connect the Ethernet cable to the Ethernet port on the rear of the CM8200.
