Arris SURFboard T25, Руководство пользователя

Страница: 18 / 34

Chapter 4
Installing the T25
CAUTION: This product is for indoor use only. Do not route the Ethernet cable(s)
outside of the building. Exposure of the cables to lightning could create a safety
hazard and damage the product.
Before starting the installation, make sure of the following:
■
You have all the
Additional item(s) needed (not included)
(page 11)
■
You have
Establish an Internet connection
(page 19)
■
Cable, phone, and power outlets are available near the T25.
If a cable outlet is not conveniently located, your service provider can install a new one.
■
Broadband cable service is available in your area.
To set up a Wi-Fi network, you will need a high-speed Internet connection provided by
Comcast.
Install the T25
Figure 3: T25 connection diagram
1. Check that a coaxial cable is already connected to a cable wall outlet or RF splitter (not
included).
2. Connect the other end of the coaxial cable to the
Cable
connector on the rear of the
T25.
SURFboard
®
T25 Cable Modem with Xfinity Voice User Guide STANDARD Revision 2.0 18