Powering and initial cabling
Press the
Power
button on the back of the gateway. The Power indicator will initially flash GREEN to indicate that the gateway is booting and then solid GREEN
to indicate it is operational. Under normal operation, while the gateway is powering up, LED status is as follows:
• Broadband, WAN Ethernet, Wi-Fi and and Voice indicators will be off.
• Broadband indicator will initially be solid RED, and upon Ethernet link, it will light solid BLUE.
• Phone indicator will light solid GREEN after the Broadband indicator lights BLUE to indicate that digital phone service is active.
• Wireless indicator will light solid GREEN to indicate that the Wireless service is enabled.
NOTE
: During the initial setup, it may take several minutes to achieve service connectivity.
Broadband
: Follow instructions provided by your Service Provider. If no instructions are provided, then call your Service Provider.
Digital Phone Service
: To connect the gateway to a digital phone line:
1. Connect the supplied RJ-11 terminated phone cable to the Phone port on the back of the gateway.
2. Connect the phone cable to a phone or fax machine.
LAN Ethernet
: To make an Ethernet connection:
1. Connect the supplied RJ-45 terminated Ethernet cable to one of the Ethernet ports on the back of the gateway.
2. Connect the Ethernet cable to the Ethernet port on a local computer.
USB port
: To connect the gateway to the USB port:
1. Connect the USB cable to the USB port on the back of the gateway.
2. Connect the other end of the USB cable to your device.
1. Open a web browser, such as Firefox, Chrome, or Microsoft Internet Explorer, from the computer connected to the gateway.
2. Type the following address in the address bar of the browser to open the Access Code Required Screen:
http://192.168.1.254
On the wireless device, use the Wireless setup option to find the available wireless network names. The Wi-Fi Network Name for the gateway is printed on
the bottom of the label along with the Wi-Fi password.
NOTE: The main page provides an overview about the connection and home network status. You can also access information for the following:
• Home
: Network Status/Configuration
• System
: System status, upgrade, restart and factory reset options
• Broadband
: WAN status, statistics, and parameter settings
• Wi-Fi
: Wi-Fi status and configuration
• Voice
: Voice status and QoS configuration
• Home Network
: LAN status and configuration
• Firewall
: Firewall status/configuration
• Diagnostics
: Gateway connection and application diagnostics
1. Provide the Device Access Code, a unique code printed on a label on the base of the gateway.
2. Select
Continue
.
NOTE
: Select the appropriate language button in the lower right corner of the Access Code Required screen to continue with the selected language.
NOTE
: The terms Device Access Code and Password are sometimes used interchangeably.
To access the Web Management configuration pages:
Access Code Required
Page
Access the Web Management Interface
Add a wireless device to the gateway
Declaration of conformity
The following sections describe regulatory compliance by region.
FCC/ISED compliance
This device has been tested and certified as compliant with the regulations and guidelines
set forth in the Federal Communication Commission - FCC Title 47 Part 15 and the
Innovation Science and Economic Development (ISED) Canada CAN ICES-3 (B)/NMB-3(B)
and RSS-247 Radio and Telecommunication regulatory requirements.
Cet appareil a été testé et certifié conforme aux réglementations et directives définies
dans les exigences réglementaires CAN CAN ICES-3 (B) / NMB-3 (B) et RSS-247 d’Innovation
et Canada (ISED).
Manufacturer:
ARRIS
Models:
NVG5x8 Product Family
Part 15 of FCC rules
This device complies with part 15 of the FCC Rules and Industry Canada license- exempt
RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux normes CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes:
1. l’appareil ne doit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
Users should be advised that high-power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and 5470-5725 MHz and that these radars
could cause interference and/or damage to the LE-LAN device.
Les utilisateurs doivent être avisés que les radars de haute puissance sont désignés
utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5250-5350 MHz et
5470- 5725 MHz et que ces radars peuvent causer du brouillage et/ou des dommages
aux dispositifs LAN-EL. The device for operation in the band 5150-5250MHz is only for
indoor use to reduce the potential for harmful interference to co-channel mobile satellite
systems.
Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement
pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution:
Changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate this equipment.
This radio transmitter 3439B-NGV5XDBAX has been approved by Innovation, Science and
Economic Development Canada to operate with the antenna types listed below, with the
maximum permissible gain indicated. Antenna types not included in this list that have a
gain greater than the maximum gain indicated for any type listed are strictly prohibited
for use with this device.
Cet émetteur radio 3439B- NGV5XDBAX a été approuvé par Innovation, Sciences
et Développement économique Canada pour fonctionner avec les types d’antenne
énumérés ci-dessous, avec le gain maximal autorisé indiqué. Les types d’antenne non
inclus dans cette liste et dont le gain est supérieur au gain maximal indiqué pour l’un
des types répertoriés ne sont strictement pas autorisés pour une utilisation avec cet
appareil.
Image: Home page
NOTE
: This is a reference image and may slightly differ based on your device.
