Arris Moxi HD, Руководство пользователя

Страница: 126 / 152

Switched Digital Video
Some cable service providers use a broadcast technology in particular areas called Switched Digital Video. If you live in a Switched Digital
Video location, your Moxi HD DVR can now receive Switched Digital Video channels. To get these channels, you need to request a Switched
Digital Video Tuning adapter from your cable service provider. (Fees for the Switched Digital Video Tuning adapter are determined by your
cable service provider.)
To install the adapter:
1. Make sure that your CableCARD has been set up and paired with your Moxi HD DVR.
2. If your Moxi HD DVR is already installed, disconnect the coax cable from the back of the Moxi HD DVR.
3. Connect the coax cable to the SDV Tuning adapter.
4. Connect a coax cable from the SDV Tuning adapter to the cable-in port on the Moxi HD DVR.
5. Connect the USB cable between the SDV Tuning adapter and the Moxi HD DVR (use the front or rear USB port.)
6. Plug-in the SDV Tuning adapter power cord.
7. After a few minutes, if the SDV Tuning adapter is Cablelabs approved, you will see a message that a new tuner was detected and a
prompt asking to restart. Select yes.
8. After the HD DVR restarts, you will see the SDV channels in your Channel List and will be able to receive the SDV channels.
Will SDV affect viewing?
SDV technology allows your cable service provider to check in with your TV to see if you are still watching a tuned SDV channel. All SDV
channels have timing windows defined by your cable service provider. Whenever you tune to an SDV channel, the timer starts. If you are
tuned to that SDV channel when the timer ends, you will receive a message from your cable service provider. If you are currently watching
the SDV channel, respond to the message, and there will be no more changes. If you do not respond, your cable service provider may stop
sending that channel to your home. In order to receive the SDV channel again, re-tune to it using the Moxi Menu, Flip Bar, or the Moxi remote.
Availability of SDV channels is dependent on your cable service provider. If they are unable to provide the requested channel, you will receive
notification from them. Please contact your cable service provider if you have any questions about SDV policies.
Will SDV affect recordings?
Moxi will automatically advise your cable service provider, via the SDV Tuning adapter, whenever an SDV channel is being used for a
recording, thus preventing the SDV channel from being reclaimed.