Chapter 20: CPE Device Classes
STANDARD Revision 1.0
C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved.
657
The show cable modem summary commands display counts that are based on what devices the modems indicate they can
support. These totals do not necessarily indicate how many CPE devices are actually in use for each type. This behavior is in
accordance with Option 43.3.
The new eSAFE device columns are available for use in the show cable modem column and configure cable modem format
commands.
Show IP Interface Cable-Mac Command
The following is a sample output of the
show ip interface cable 2/0
:
cable 2/0.0, VRF: default, IP Address: 10.131.128.1/19
Secondary IP Address(es):
10.131.160.1/19
Physical Address: 0001.5c22.63e4
MTU is 1500
DHCP Policy mode is enabled
DHCP Server Helper Address(es):
10.50.31.3 for Traffic Type "any"
Directed Broadcast is disabled
ICMP unreachables are always sent
Multicast reserved groups joined: None
Source-verify is disabled
InOctets = 0 OutOctets = 384
InUcastPkts= 0 OutUcastPkts= 4
InDiscards = 0 OutDiscards = 0
InErrors = 0 OutErrors = 0
InMulticastPkts= 0 OutMulticastPkts= 2
cable 2/0.1, VRF: vrf_a, IP Address: 10.181.128.1/19
Secondary IP Address(es):
No Secondary Addresses
Physical Address: 0001.5c22.63e4
MTU is 1500
DHCP Policy mode is disabled (primary mode)
DHCP Server Helper Address(es):
No Helper Addresses
Directed Broadcast is disabled
ICMP unreachables are always sent
Multicast reserved groups joined: None
Source-verify is disabled