Intended Use
This product is intended to illuminate persons and objects in a
dry environment.
Always follow the safety information.
Any usage other than described above is not permitted and can
damage the product and lead to associated risks such as injuries
and damage. You are not allowed to modify the product.
This product fulfills national and international requirements.
Safety Instructions
•
The SnapBag 6‘ x 6‘ for S360 is a professional product for
use with an ARRI SkyPanel S360 only.
•
Before using the SnapBag 6‘ x 6‘ for S360, please read
these instructions carefully and refer also to the instructions
of the SkyPanel S360.
•
Please keep these instructions for future reference.
•
Do not leave the SnapBag 6‘ x 6‘ for S360 unattended while
it is in use.
•
Please make sure that you take care of local safety regula-
tions and guidelines while using the SnapBag 6‘ x 6‘ for
S360, such as mechanical safety attachments etc.
•
Intense heat, moisture, acidic and chemically aggressive
substances may damage the SnapBag 6‘ x 6‘ for S360 and
may lead to an insecure operation.
•
Do not use the SnapBag 6‘ x 6‘ for S360 in case of any dam-
age – please contact your ARRI service partner for repair.
•
Please take additional safety measures when you use the
SnapBag 6‘ x 6‘ for S360 under windy conditions.
•
Clean the SnapBag 6‘ x 6‘ for S360 only by hand washing
with welltempered water and mild soap – the SnapBag
6‘ x 6‘ for S360 must not be machine washed. In order to
dry, please assemble completely and let it dry by air.
•
You are not allowed to modify and/or repair the SnapBag
6‘ x 6‘ for S360 by yourself.
•
Store and transport the SnapBag 6‘ x 6‘ for S360 in the
transport bag after usage.
•
ARRI is not liable for damages caused by incorrect opera-
tion.
•
Maximum rated temperatures for the
SnapBag 6‘ x 6‘ for S360:
T
ambient
: +50°C (122°F) / T
surface
: +85°C (185°F)
Warnings
•
Never cover air vents during operation. Keep a minimum
clearance around the air vents of 0.5 m (1.65 ft.).
•
Avoid direct illumination by other luminaires or other heat
sources.
•
Check the mains cable and connector cable prior to every
operation for damage.
•
In case of visible damage to the mains cable or the housing,
the device must not be operated any longer. Damaged
components must be replaced by an ARRI service center.
To Mount the SnapBag 6‘x6‘ for S360
•
Take the SnapBag out of the bag and unfold it.
•
Close both top straps and hang the SnapBag over the top
feet of the S360 to simplify mounting of the SnapBag.
•
See picture below. Pass the lower fastening loops through
the lower handles and fasten them. Pass the upper fasten-
ing loops through the upper handles and fasten them.
•
See left picture below. Pass the left and right fastening
loops behind the tilt lock levers and fasten them.
•
See right picture above. Check, that in every corner on the
front the SnapBag is held by the short elastic band.
•
Secure the SnapBag with a safety cable through the safety
cable attachment and the S360.
•
Mount the diffusor.
ARRI, ARRI ARRI, the ARRI Logo, ARRIMAX, ARRISUN, EB, EBB, L-Series, MAX Technology, M-Series, POCKETPAR,
True Blue, SkyPanel, SKYPANEL, T 12 and T 24 are registered Trademarks of Arnold & Richter Cine Technik GmbH & Co.
Betriebs KG.
Design and specifications are subject to change without notice.
ARRI Service
In case of technical problems please visit us at
www.arri.com
Arnold & Richter Cine Technik GmbH & Co. KG
Global Application & Services
Pulvermühle
D-83071 Stephanskirchen
Germany
ENGLISH
Содержание Skypanel DoPchoice SnapBag
Страница 4: ......
