ARRI MB-20 Quick Guide 02/2006, Page 7
The Swing Away Module
Engage the two mounting pins of the Swing Away Module into the corresponding holes in the Basic Module, press
fully home and tighten the two blue clamp knobs. To remove the Swing Away Module, loosen the blue clamp knobs
and it is then necessary to pull the black horizontal adjuster out of engagement with the mounting pins before they
can be withdrawn from the Basic Module.
Back 138mm Bellows Adapter
Fit the Back 138mm Bellows Adapter over the two locating pins and secure with the two blue lock screws.
The red rotation lock either releases or locks the rotation of the complete bellows adapter along with any filter
mounted in the bellows filter holder.
Basic Operation
Swing Away
Module
Pull up knob to
swing open
Blue clamp
knobs
Pull black horizontal adjuster to release mounting pins
Pull black horizontal adjuster
to release mounting pins
Blue lock screw
Locating pin
Back 138mm
Bellows Adapter
Locating pin
Blue lock screw
Red rotation lock
