ARRI KK.0037273 Скачать руководство пользователя страница 5

Страница: 5 / 44

For your safety

How To Use This Manual

All directions are given from a camera operator's point of view. For example, camera-right

side refers to the right side of the camera when standing behind the camera and operating

it in a normal fashion.

Strengthen Your Knowledge and Get Trained

The ARRI Academy courses provide unrivaled insights into the full possibilities of working

with ARRI camera systems, camera stabilizer systems, lenses, lights and accessories.

To learn more, please visit http://arri.com/academy.

2.1

Risk Levels and Alert Symbols

Safety warnings, safety alert symbols, and signal words in these instructions indicate

different risk levels.

The SRH-360 stabilized remote head and related products should only be used by

experienced and trained operators. This product is

not

designed for inexperienced users

and should not and must not be used without proper training.

ARRI recommends that all users of the SRH-360 stabilized remote head read the

manual in its entirety prior to use.

Warning

NOTICE

The product is solely and exclusively available for commercial customers and shall be

used by skilled personnel only. Every user should be trained according to ARRI

guidelines. Use the product only for the purpose described in this document. Always

follow the valid instructions and system requirements for all equipment involved.

DANGER

indicates an imminent hazardous situation which,

if not avoided,

will result in

death or serious injury.

WARNING

indicates a potentially hazardous situation which, if not avoided,

may result in

death or serious injury.

CAUTION

indicates a potentially hazardous situation which, if not avoided,

may result in

minor or moderate injury.

NOTICE

NOTE

explains practices not related to physical injury. No safety alert

symbol appears with this signal word.

NOTE

Provides additional information to clarify or simplify a procedure.

CAUTION

DANGER

Warning

For your safety

Содержание KK.0037273













































Результаты поиска

Содержание KK.0037273

Отзывы:

Похожие инструкции для KK.0037273

Бренды по названию

Популярные бренды

ARRI KK.0037273, Руководство пользователя

Результаты поиска

Содержание KK.0037273

Отзывы:

Похожие инструкции для KK.0037273

Бренды по названию

Популярные бренды