3
2
Imprint
Copyright © 2016 Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All rights reserved.
No parts of this document may be reproduced without prior written consent of Arnold & Richter
Cine Technik GmbH & Co. Betriebs KG. Specifications are subject to change without notice.
Errors, omissions, and modifications excepted
ARRI, ALEXA, AMIRA, Master Grip, LDS and LENS DATA SYSTEM are trademarks or registered
trademarks of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All other brands or products
are trademarks or registered trademarks of their respective holders and should be treated as such.
Original version.
For further assistance
ARRI Cine + Video Geräte Gesellschaft m.b.H.
Pottendorferstraße 23-25/3/1
A-1120 Vienna Austria
E-mail:
Website:
www.arri.com
Scope
This user manual applies to the following product:
K2.0013195 Viewfinder Bracket for Canon EVF
Disclaimer
Before using the products described in this manual, be sure to read and understand all the particular
instructions.
Important safety information:
Danger of suffocation caused by small parts. Keep this device out of the reach of
children and pets.
WARNING!
•
Make sure, that all single parts are well fastened. Check the locking screws
and all mountings before every use.
•
Please always make sure that your camera and the accessories are mounted
firmly and securely. Check all connections for a tight and secure hold.
•
When using on a tripod (optional), please pay attention to the maximal load
capacity of the tripod (refer to the manufacturer).
NOTICE
Attaching the Viewfinder Bracket
1. Unscrew the cover screw
Note:
This screw is left handed
2. Remove the swing ring
Instructions
To loosen the screws, please use a cross-point screwdriver PH00 and a Torx 1,3.
NOTICE
