ALEXA Mini LF SUP 7.1.2 Release Notes
Page 6 of 8
All data subject to change without further notice.
C. Known Issues
–
Software
Lenses
ALURA 1.4x and 2.0x Extender are not recognized
ALURA 1.4x and 2.0x Extender are not recognized by the camera and therefore the lens information shown in the
menu, the SDI overlays and the WCU-4 show the information of the lens without considering the use of the extenders.
Monitoring
MVF-2 can show subtle flickering in upper part
Sometimes a subtle flickering can be observed in the upper part of the image of the MVF-2 viewfinder (through the
eyepiece, not the flip-out monitor).
Brightness flicker when EVF Zoom is activated or EVF Surround view is off
Brightness flicker in the upper part of the OLED display can be noticed.
MVF-2 flip-out monitor shows vertical stripe
Sometimes the MVF-2 flip-out monitor shows a vertical stripe on the left side of the image which is part of the image
from the right. This can be fixed by unplugging and re-plugging the VF cable.
No Surround View for 2.8K S35 4:3
–
2.8K
Due to technical limitations, surround view for 2.8K S35 4:3
–
2.8K had to be deactivated in ALEXA Mini LF SUP 7.1.
Magnification Limits
Depending on the recording format, the MAGNIFICATION feature can sometimes reach maximum magnification
before the top value of 200% is reached. In this case, higher value numbers will be shown in the menu, but actual
image magnification will not increase further.
Playback
Small playback image
When using MAGNIFICATION, the playback image may show less than monitored during recording and standby.
Post
No Mirror image function for MXF/Apple ProRes in DaVinci Resolve
Th
e vertical “Mirror image” function does not work for MXF/Apple ProRes in DaVinci Resolve. However, it will work
with ARRIRAW.
Remote Control
WiFi still on when camera is in host mode and WiFi is turned off
When the camera is in WiFi host mode (MENU > System > Network/WiFi > WiFi Mode > Host), a client is connected
and WiFi Power is turned off, WiFi Power stays on.
Webremote reconnect takes long after switching WiFi power OFF and back ON.
Sometimes the reconnect of the Webremote takes unexpectedly long after switching WiFi power OFF and back ON.
Webremote function not working properly after SUP update
After updating the camera, the web remote function may not work properly unless the browser cache of your web
browser has been cleared.
SmallHD Cine 7 partial functionality
When remote controlling the camera with a SmallHD Cine 7, not all features will work as expected.
When connecting to a WiFi network in client mode, you may have to enter the correct password twice.
WiFi does not work as expected in WPA encrypted networks
Only networks indicating WPA/WPA2 encryption will perform as expected. WPA only encrypted networks are not
supported.
