Arregui FORMA B, Инструкция по эксплуатации

Страница: 3 / 32

to
<EN>
1. OPENING FOR THE FIRST TIME:
Every safe has 3pcs keys, one of them is the key marked with a red dot on
the key handle, and the other two keys are for normal use. To open the safe
time, insert the emergency key into the key hole and turn it clockwise
direction.
In order function, the safe needs 4 x 1.5 V alkaline batteries that are
placed in the battery holder located at the back of the door. In order to
insert them, open the cover of the battery holder and place the batteries
according to the diagram that is found on the inside. On completion of this
process the electronic system will be activated.
-
2. OPENING AND CLOSING THE SAFE:
• Press the key. A green light will begin to (if it is red, see point:
6. “Condition of the battery indicator”
).
• Enter your personal opening code. The light will continue to
• Press the
key and turn the key one half turn in the lock to the right
(clockwise).
If the entered code is correct
, the light will be illumi-
nated continuously for 3 seconds and a long beep for acceptance will
sound; you have this time to turn the key and open the safe.
If the
entered code is incorrect , 4 short deep sounding beeps will sound
and the light will go out. In this event, repeat the process. The safe will
allow up to 5 incorrect code entries before becoming blocked for 15
minutes as a security measure, during which it will emit a beep every 5
seconds. During this time it is not possible to use the keypad.
To close the safe , simply turn the key 1 half turn to the left (anti-
clockwise).
To close the safe , simply turn the key 1 half turn to the left (anti-
clockwise).