Array electronic SR Series Скачать руководство пользователя страница 75

Страница: 75 / 91

Controladores lógicos programables PLC baja gama expandibles entradas digitales AC 74368-SR22MRDC ARRAY Manual Ingles www.viaindustrial.com

Chapter V Voice Module

Voice alarm function, telephone control function and dialing automatically

function are very important functions of SR. To realize these functions, we should

match SR with the SR-VP voice module. Voice module blocks have two types:

SR-VPA (AC Type), SR-VPD (DC Type).

5.1 Structure of Voice Module

Fig. 5.1 Structure of SR-VP Series Voice Module

1. Connecting port between voice module and the machine

2. Connecting port between voice module and communication cable

3. MIC (Users may record through this place when recording off-line or through the

front panel.)

4. SR (Speaker broadcasting interface which the voice module self-carrying)

5. Voice module on-line recording audio input port

6. Socket of telephone crystal plug

7. Indicator of the power and recording of the voice module (It will be on green

when the voice module is powered on-power indicator. It will be on red when the

voice module begins recording-recording indicator. When recording, users must

wait till the recording indicator is lighted and stop when it is off. Otherwise the

voice can’t be recorded.)

8. Power input (AC or DC) (100-240VAC), (12-24VDC)

9. Audio output port (to be connected with the acoustics)

5.2 Connection between Voice Module and SR

SR-VP type voice module can be connected with the SR series machines

through SR-CB. Pay attention that only the machines of the same type can be

connected together. That is to say that SR-VPA, AC type, can only be connected with

AC type machine and SR-VPD, the DC type, can only be connected with DC type

Содержание SR Series




























































































Результаты поиска

Содержание SR Series

Отзывы:

Бренды по названию

Популярные бренды

Array electronic SR Series, Руководство пользователя

Результаты поиска

Содержание SR Series

Отзывы:

Бренды по названию

Популярные бренды