As shown in Fig.
②
, plug one end of the adapter into the power
input outlet. Then power on the other end of the adapter as
shown in Fig.
①
.
If charge in automobile, please plug end A of cigarette lighter
cable into cigarette lighter holder, then plug end B into the
outlet of charger.
As shown in Fig.
③
, make sure that the transmitter or receiver
is switched OFF.
As shown in Fig.
④
, put the transmitter or receiver into
charging slot.
Ⅴ
. Indications of Charging LED
Self-test:
The LED will be in red, then in green, at last not on the moment
when the power of the charger is switched on.
This process is called self-test.
When the LED is in red, it indicates that the batteries are
charging.
When the LED is in green, it indicates that the batteries are
fully charged.
When the LED doesn’t work, it indicates that the charging
circuit is not closed (See Elimination of Common Faults 1).
When the LED blinks in red and green by turns, it indicates that
the batteries are worn out (See Elimination of Common Faults 2)
When the LED blinks in red, it indicates that charging is not
functioning (See Elimination of Common Faults 3).
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
