Arrakis Systems MARC-15 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 82

Arrakis Systems MARC-15 Скачать руководство пользователя страница 29

I N S T A L L A T I O N I N S T R U C T I O N S

Unpacking

a) PACKING SLIPS- do you have everything?
Check the Packing Slips that come with the shipment to
be certain that all packages have been received.

b) CHECK FOR DAMAGE
Check all packages and equipment for damage IMMEDI-
ATELY upon receipt.

If damage is found, contact Arrakis Systems immediate-
ly to report the damage. (refer to inside cover of this
manual for contact information)

c) CAREFULLY GO THROUGH EACH BOX
Arrakis inspects every shipment for accuracy. You will
receive all of the appropriate documentation, install kit,
spare parts kit, and equipment. Be very careful to not
throw away anything if you decide to throw out the ship-
ping materials.

d) KEEP ALL PACKING MATERIALS
Arrakis consoles are shipped in custom shipping con-
tainers. Keep all containers at least until the installation
is complete. This is in case some piece of equipment
may need to be returned to the factory for service.

It is a good idea to keep the shipping materials for the
life of the product. Arrakis is not responsible for ship-
ping damage to products not shipped to the factory in
the original packing materials.

SAVE ALL PACKING MATERIAL

4.2

«
...
27
28
29
30
31
...
»

Содержание MARC-15



















































































Отзывы:

Нет отзывов