4 |
Page
back of the antenna. Install the 4 flat washers, 4 spring washers followed by the
four 8mm nuts. Tighten nuts. Secure L-bracket to a φ30mm ~ φ50mm pole with u-bolt
and saw tooth clamp. (Note: different holes/slots can be used to set to the desired
inclination.) Securely mount the second directional 15dBi panel antenna vertically
below the first directional antenna, following the installing instructions above.
Point the second directional antenna to an area which may be served with backhaul.
Using two provided RF cables, connect the first antenna to the green connectors.
Using the remaining two provided RF cables, connect the second directional antenna to
the pink connectors.
The omni-directional antenna have an estimated range of 330 meters outdoor un-
obstructed. Actual performance will vary based on environmental conditions and actual
installation. The directional panel antenna can be as high as 3 km. Actual
performance will vary based on environmental conditions, actual installation, and
gain of antennae.
Color map:
Top:
Bottom:
55
5
GHz
Radio
2
2.4
GHz
5
5
2.4
5
GHz
Radio
1
5
2.4
GHz